Ordering
Below you can order
via Paypal SHOPPING CART or if you e-mail me your request I will
send an INVOICE from PayPal. This gives me your address to calculate
shipping. No funds are transfered UNTIL you actually pay the invoice
through PayPal's secure server!
SHIPPING
FLAT RATE $5.00
Payments will be
received by 2269270 ONTARIO LIMITED
Operating
as: "Ceramicknife.org" or
"Eyefatigue.com
|

Click Here For Larger View
|
$79.95 Carbon Fibre Ceramic
folding Knife
My
first
Presentation grade ceramic folding knife. Solid Carbon Fibre
handles,
Black ceramic blade with a mirror polished finish and razor sharp deep
hollow grind. Pocket clip, blade locking spring, double sided
thumb
stud, and all screws and fittings are Titanium Nitride coated stainless
steel. With a 3 ¼” blade the total weight is only 60 grams.
(2 oz).
Even the small ball retainer (holds blade in place when folded) is
ceramic to prevent wear. Manufactured to the highest
standards with
best materials available and individually hand assembled. I have
concentrated on reasonably priced working world ceramic knives a number
of customers have asked for the best available regardless of
pricing. I have found that in very extreme salt water and heat that
the Ti Coated screws can present surface corrosion. Fresh water is not
a problem and rinsing after salt exposure OR light oiling would stop
this from happening. The UK and Australian Customs have refused to
permit entry of this knife to other than Police / Military Customers!
|
|
Item
|
Price
|
Order
Now!
|
|
CARBON FIBRE CERAMIC
FOLDING KNIFE
|
$79.95
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
$23.95 EOD Knife
Military
and Police worldwide have employed this tool for EOD and other tasks,
completely non-magnetic, non conductive and impervious to corrosion.
Salt water canoeists and sailors love this for permanent attachment to
gear. This knive has been improved over time and now has a black
ceramic blade, a non-slip grip and an optional nylon belt sheath
available ($2.00). The three inch blade handles most tasks, the extreme
stilleto point is required by my EOD customers for making small
openings into packages.
Tip can be "snapped off" and ground flat if requested for other
applications.
|
|
Item
|
Price
|
Order
Now!
|
|
EOD Knife
|
$23.95
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View |
$2.00 Sheath for EOD Knife |
|
Item
|
Price
|
Order
Now!
|
|
Sheath for EOD Knife
|
$2.00
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
$59.95 Pocket Sized Carbon Fiber Knife
Same high quality carbon fiber scales, titanium frame lock, only much easier to carry in pocket for everyday use.
|
|
Item
|
Price
|
Order
Now!
|
|
Pocket Sized Carbon Fiber Knife
|
$59.95
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

|
$39.95 Ceramic
Pocket Knife
A small ceramic bladed pocket knife
with 1 7/8” black ceramic blade. With a black nylon pouch.
An affordable alternative to more expensive Kyocera or Boker ceramic
knives with tight back lock and stainless steel handle.
|
|
Item
|
Price
|
Order
Now!
|
|
$39.95
Ceramic
Pocket Knife
|
$39.95
|
|
|
Shipping Charges
$5.00 flat rate |
|
|
|
|
$59.95 Hunter's Ceramic Knife
Light weight with 2.88" black ceramic
blade fitted to a stainless steel frame with frame locking of the blade
when open. Reversible thumb stud and also pocket clip. Very
refined diamond honed blade to give a razor edge without showing hollow
grind marks. This knife is the result of four years of feedback
from my customers.
|
|
Item
|
Price
|
Order
Now!
|
|
Hunter's
Ceramic Knife
|
$59.95
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
$49.95
Rigger’s Ceramic Knife
It
appears that sailors in particular require a one hand opening knife. A
ceramic folding knife has particular appeal due to the need to cut
some lines containing “Kevlar” and other really tough
materials. This knife design uses a reverse tanto point to reduce
the possibility of an accidental deep wound on a tossing vessel. Using
a white ceramic blade on this knife serves to keep costs a bit
lower AND does satisfy sailor’s penchant for wearing white
costumes. This ceramic pocketknife again has a blade length of just
under 3” to satisfy most regulations about concealed knives.
Folded it measures 3 ¾” and has a handle width of only 3/8”. Now produced with a pocket clip and two sided thumb stud.
|
|
Item
|
Price
|
Order
Now!
|
|
Rigger’s
Ceramic Knife
|
$49.95
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
Ceramic Pocket Knife with clip $45.95
This medium sized
pocket knife was designed for either with a pocket clip, or dropped
inside a pocket. There is a filler block at back of handle to prevent
coins or other debris from getting in behind a closed blade. The handle
or scales are Micarta / G10 (very low
electrical conductivity), finished with a small fishscale pattern to
help prevent slipping when used. Kind of neat that it has a bit of a
carbon fiber look as well.
|
|
Item
|
Price
|
Order
Now!
|
|
Ceramic Pocket Knife with clip
|
$45.95
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
$35.00 Neck Knife / Corrosion proof
After two or three years of requests I finally have a
small 1 1/2: blade and overall length 5 1/2" Solid Black Ceramic knife with fitted Kydex sheath.
The large hold provides for a "pinch grip" when performing delicate
tasks. Extra holes are to permit adding a custom handle or fixing
lanyard. Grooves on top and bottom provide extra grip and also assist
with wrapping paracord. Razor sharp and completely corrosion proof.
Unless heating to over 1,000 degrees in sulpheric acid!
|
|
Item
|
Price
|
Order
Now!
|
|
Neck Knife / Corrosion proof
|
$35.00
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View

Click Here For Larger View
|
$95.00 Limited Edition Damascus bladed gentleman's knife.
Not
what I usually produce but could not pass up the chance to purchase the
steel used in these. The center core is Japanese super steel,
then 23 layers of stainless steel. The edge that the supersteel
takes is almost unbelieveable, too brittle for use except in a
damascus sandwich. I thought I had enough steel for 100 knives
but ended up with 32, only 30 will be for sale. First come first
served. Note: real mother of peal scales, real turquoise,
nickle silver bolsters , lock back blade. A lot of hand
work but not polished everywhere to the point I have to charge $400
each.
*Photo below shows wave in center core, layers are too fine to pick out without a jeweller's loupe.
|
|
Item
|
Price
|
Order
Now!
|
|
Limited Edition Damascus bladed gentleman's knife
|
$95.00
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
$21.95
Ceramic
Bladed Scissors
At
the request of some of my EOD techs I have contracted to have
some small reinforced plastic scissors produced with ceramic blade
inserts. These will us 304 stainless steel for the pivot
and
tightning screw for very low magnetic signature. Overall length
is 5”,
maximum width 3 ¼” with 2 ¼” long blades (measured at 90 degrees to
each other) Weight is only one ounce. These will be marked
E.O.D. on
the handle but certainly have other uses such as near MRI
equipment.
Finger holes are large enough for real working men’s thumbs.
|
|
Item
|
Price
|
Order
Now!
|
|
DCERAMIC BLADED
SCISSORS
|
$21.95
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
Ceramic Utility Blades "Stanley
style"
These blades will fit all
standard utility knives that accept "STANLEY" style blades with two
retention grooves. Super Sharp and extremely long lasting.
Kevlar, fiber optics, fiberglas and other difficult to cut materials
handled much better. Sorry about the costs but these are
processed mainly by hand due to the limited market. |
|
Item
|
Price
|
Order
Now!
|
1 Ceramic Utility Blade
|
$5.00
|
|
| 10 Ceramic Utility Blades |
$45.00
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View

Click Here For Larger View
|
$13.00 CERAMIC
RETRACTABLE BLADE CUTTER
Retractable ceramic cutter for delicate EOD
work. Snap off blade
segments to ensure optimum sharpness. NO METAL COMPONENTS.
Non conductive and non-magnetic tool. Special production
completed to meet military requirement but should prove useful in a
number of applications!
$50 for package of
5 replacement ceramic blades
|
|
Item
|
Price
|
Order
Now!
|
|
CERAMIC RETRACTABLE
BLADE CUTTER
|
$13.00
|
|
|
Shipping Charges
$5.00 flat rate |
|
|
Item
|
Price
|
Order
Now!
|
|
5
REPLACEMENT BLADES FOR RETRACTABLE CUTTER
|
$50.00
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
$6.95 DIAMOND
SHARPENING HONE
YES you can bring
back an edge even if you have some chips. Not nearly as easy as you
can a steel blade BUT this 600 grit diamond encrusted steel credit
card sharpener does give you a reasonable working edge. See
“SHARPENING page. |
|
Item
|
Price
|
Order
Now!
|
|
DIAMOND
SHARPENING HONE
|
$6.95
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
$20.00 Titanium Pocket Hanger
This small Titanium money clip has a small
1/4" hole milled to accept split rings or other fasteners. You
can clip onto a pocket or even belt and HANG objects inside your pocket
without bunching up in the bottom. Size is 7/8" x 2 1/8"/
Note: I have other hard to find Titanium products at www.clip-money.com
|
|
Item
|
Price
|
Order
Now!
|
|
Titanium
Pocket Hanger
|
$20.00
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
Ceramic Xacto Scalpel Blades $5.00
These small blades
are for delicate work where a non-conductive and non- magnetic cutting
tool may be required.These will fit any common xacto knife
handle. Will not contaminate biological samples the way a steel
blade will.
|
|
Item
|
Price
|
Order
Now!
|
|
Ceramic Xacto Scalpel Blades
|
$5.00
|
|
|
Shipping Charges
$5.00 flat rate |
|
|

Click Here For Larger View
|
$10.00 Escape and Evasion Blade Not
for everyday use by any means but these little chisel edged blades are
only 1" long and 3/8" high. The chisel or Japanese edge is as close to
a razor blade as you can get. Sharper than ones your wife uses I
suspect. Survival kit type of tool, I would not want to skin a
moose or even a rabbit with this BUT if it was all I had I guess I
would try damned hard. Interesting comment that back of this
little tool makes a great striker for a fire rod, better sparks
than with a piece of steel. Probably as it is that much harder. |
|
Item
|
Price
|
Order
Now!
|
|
Escape and Evasion Blade
|
$10.00
|
|
|
Shipping Charges
$5.00 flat rate |
|
|
ENGRAVING OF BLADES with a laser has been done for some special orders but setup and extra
work requires a minimum of 25 knives. Contact me if this service would be useful to your business.
Before you ask, no engraving is possible on the knife handles.
Payments
will be received by 2269270 ONTARIO LIMITED
Operating
as: "Ceramicknife.org" or "Eyefatigue.com
IF
Large quantity is required please e-mail
for Pricing Details
|